LTE / cellular intelligence
MikroTik LTE monitoring that actually understands cellular
mikroHUB turns the raw AT-command soup from your MikroTik LTE modems into clean, historical signal metrics — RSRP, RSRQ, SINR, CINR, serving cell and data usage — so you can see exactly why a link is slow before the customer calls.
Every signal metric, with history
Not just a single live number — mikroHUB stores the trend, so you can correlate a drop with weather, congestion or a tower change.
RSRP
Reference Signal Received Power — the headline coverage number. Watch it trend toward −110 dBm and you know a site is drifting toward the edge of usable signal.
RSRQ
Reference Signal Received Quality. Falling RSRQ with stable RSRP usually means cell congestion or interference — not a coverage problem.
SINR
Signal-to-Interference-plus-Noise Ratio — the best single predictor of real throughput. mikroHUB flags links whose SINR collapses under load.
CINR & RSSI
Carrier-to-Interference-plus-Noise and raw RSSI for older modems, so legacy LtAP and wAP LTE kits report something useful too.
Serving cell & tower
Cell ID, band, EARFCN and operator — resolved to an approximate tower location on the map, so you can see which mast a remote site is really hanging off.
Data usage
Per-device traffic counters so a runaway update or a SIM nearing its cap never surprises you at the end of the month.
Built for fleets on cellular WAN
LTE links fail differently from fibre. mikroHUB is designed around that.
Signal history & trends
Hours, days and weeks of every metric — so "it was fine yesterday" becomes a chart, not a guess.
Failover & WAN tracking
See when a router drops to a backup WAN or a weaker band, with the signal context that explains why.
Alerts that fire early
Thresholds on RSRP/SINR and device status, delivered before the link is fully down — not after.
Tower geolocation
Approximate serving-tower location on a map from cell data, so you can reason about antenna aim and line of sight remotely.
Multi-SIM visibility
Track which SIM and operator a dual-SIM modem is actually using, and how each performs.
Roaming awareness
Spot a SIM that has slipped onto a roaming partner network — often the hidden cause of a "slow" or expensive site.
Why not just open WinBox?
WinBox shows you one modem, right now. For a single router that is fine. But once you run dozens of LTE sites — WISP backhaul, IoT gateways, failover routers behind CGNAT — you need the history, the comparison and the alerting across the whole fleet, in one place, without SSHing into each box.
mikroHUB connects over the RouterOS API or a lightweight agent and never stores your device passwords in plaintext — credentials live in an encrypted vault, and in zero-trust agent mode they never reach our servers at all. You get cloud-wide LTE visibility without handing over the keys to your routers.
MikroTik LTE monitoring — FAQ
Which MikroTik LTE devices are supported?
Any RouterOS device that exposes an LTE interface — Chateau, LtAP, wAP LTE, SXT LTE, the LTE-kit modems and most third-party modems RouterOS can read. If RouterOS can report the signal, mikroHUB can chart it.
How do I connect a router?
Add the device with its RouterOS API credentials, or drop in the agent for a zero-trust setup behind CGNAT. Polling starts immediately and the first signal samples appear within a minute or two.
What's a good RSRP / SINR for LTE?
As a rule of thumb: RSRP above −90 dBm is excellent, −90 to −105 dBm is good, and below −110 dBm you're at the edge. SINR above 20 dB is excellent and below 0 dB usually means trouble. mikroHUB colour-codes these so you don't have to memorise them.
Can it tell me when a site fails over to backup?
Yes. mikroHUB tracks interface and WAN status and can alert when a router drops onto a backup link or a weaker band, with the signal history around the event so you can see the cause.
Does it work with any mobile operator?
Yes — the metrics come from the modem itself, so mikroHUB is operator-agnostic and works on any carrier and SIM your MikroTik modem connects to, in any country.
Explore more
See your fleet's signal in one place
Connect your first MikroTik LTE router in minutes. Free for 3 devices, no credit card.